Beware, that standards are changed, revised and omitted at all times. This means that you will have to visit the homepages of your local authorities or websites like www.iec.ch and www.iso.ch in order to be well informed of the latest developments of particular standards.

The overview is grouped and each group includes standards sorted by their numbers, not by titles.

LIST OF STANDARD GROUPS


DOCUMENTATION AND GUIDELINES

IEC/EN 62023: Pr2010

Structuring of technical information and documentation. Rules for structuring of technical information based on the use of a main document and complementary documents. (Pr = Preliminary. Replaces standard from 2000).

IEC/EN 62027: Pr2010

Preparation of object lists including parts list. Rules for preparation of any kind of object list for use in the design and engineering process and intended to be supplied with the documentation. (Pr = Preliminary. Replaces standard from 2003).

IEC/EN 82079: Pr2011

Preparation of instructions for use – Structuring, content and presentation – Part 1: General principles and detailed requirements: This part of the International Standard provides general principles and detailed requirements for the design and formulation of all types of instructions for use that will be necessary or helpful for users of products of all kinds ranging from a tin of paint to large or highly complex products, such as large industrial machinery, turnkey based plants or buildings (Pr = Preliminary. Replaces standard 62079 from 2003).

IEC/EN 82045-1:2002

Document management – Part 1: Principles and methods. This part of International Standard 82045 specifies principles and methods to define metadata for the management of documents associated with objects throughout their life cycle; this cycle generally covers a range from the conceptual idea of a document to its deletion. The established principles and methods are basic for all document management systems

IEC/EN 82045-2:2005

Document management – Part 2: Metadata elements and information reference model.

ISO 15489:2001

Information and documentation – Records management – Part 1: General. Part 2: Guidelines.

EMC AND TELECOMMUNICATION

IEC 61000-6-x series

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified.

INSTALLATIONS

ISO 29481-1:2010

Building information modelling – Information delivery manual – Part 1: Methodology and format.

EN ISO 16484-5:2010

This part of ISO 16484 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&R) and other building systems.

EN ISO 10628: 2001

Flow diagrams for process plants – General rules.

EN 13321 series (2006-2007)

Open data communication in building automation, controls and building management – Home and building electronic system – Part 1: Product and system requirements. Part 2: KNXnet/IP Communication.

EN 14908 series (2005 – 2010)

Open Data Communication in Building Automation, Controls and Building Management.
Parts 1 – 6: Building network protocol –Network Protocols – Implementation – Application elements.

EN/ISO 10209: 2010 (Pr)

Technical product documentation. Part 1: Vocabulary – Terms relating to technical drawings, product definition and related products. Part 2: Vocabulary – Terms relating to projection methods. (The standard is under revision).

CLC/TR 50090-9-2: 2007

Home and Building Electronic Systems (HBES) – Part 9-2: Installation requirements – Inspection and testing of HBES installation This document provides the specific requirements for inspectors and commissioning engineers (as defined in the document), on checking and approving HBES installations in order to ensure its quality and safe operation. The requirements apply to the HBES itself and its relations and interfaces with other systems and functions of buildings both inside and outside.

EN 50131-1: 2007

Alarm systems – Intrusion and hold-up systems – Part 1: System requirements. This European Standard specifies the requirements for Intrusion and Hold-up Alarm Systems installed in buildings using specific or non-specific wired interconnections or wire-free interconnections.

EN 50522: 2011

Earthing of power installations exceeding 1 kV a.c. This European Standard is applicable to specify the requirements for the design and erection of earthing systems of electrical installations, in systems with nominal voltage above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use intended. The electrical power installation includes, among others, the following equipment:– rotating electrical machines;– switchgear;– transformers and reactors;– converters;– cables;– wiring systems;– batteries;– capacitors;– earthing systems;– buildings and fences which are part of a closed electrical operating area;– associated protection, control and auxiliary systems etc.

IEC 60364 series (2005-2011)

Low voltage installations – various requirements.

MARKING AND IDENTIFICATION

IEC/EN 60073: 2003

Basic and safety principles for man-machine interface, marking and identication – Coding principles for indicators and actuators.

IEC/EN 60445: 2010

Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors.

IEC 60757: 1997

Code for designation of colours. The standard applies to the text of descriptions, drawings, markings, etc., in the elctrotechnical field and lays down a letter code for the designation of some distinct colour.

IEC/EN 61175: 2006

Industrial systems, installations and equipment and industrial products – Designation of signals. This standard provides rules for the composition of designations and names for the identification of signals and signal connections. Includes the designation of power supply circuits.

IEC/EN 61286: 2003

Informationsteknologi. Kodede grafiske Information technology – Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange.

IEC/EN 61310 series (2008)

Safety of machinery – Indication, marking and actuation – Part 1: Requirements for visual, acoustic and tactile signals Part 2: Requirements for marking Part 3: Requirements for the location and operation of actuators.

IEC/EN 61666: 2010

Industrial systems, installations and equipment and industrial products – Identification of terminals within a system.

IEC/EN 62491: 2009

Industrial systems, installations and equipment and industrial products – Labelling of cables and cores.

PRODUCTS

IEC 954-1: 1999

Safety of machinery – Safety-realeted parts of control systems.
This old standard is being replaced by:

IEC/EN 13849-1

Safety of machinery – Safety-related parts of control systems.
The two standards above are currently being revised.

IEC/EN 60204-1: 2009 (2010)

Safety of machinery – Electrical equipment of machines – Part 1: General requirements. This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1.000 V for alternating current (a.c.) and not exceeding 1.500 V for direct current (d.c.), and with nominal supply frequencies not exceeding 200 Hz.

IEC/EN 60439-1: 2009

Low-voltage switchgear and controlgear assemblies – Part 1: General rules. The standard lays down the definitions and states the service conditions, construction requirements, technical characteristics and verification requirements for low-voltage switchgear and controlgear assemblies.

IEC/EN 60529: 2002

Degrees of protection provided by enclosures (IP Code).

IEC/EN 60947 series (1998-2011)

Low-voltage switchgear and controlgear. The series covers General rules – Circuit-breakers – Switches, disconnectors, switch-disconnectors and fuse-combination units – Contactors and motor-starters – Electromechanical contactors and motor-starters etc.
Some parts of the series are under revision.

REFERENCE DESIGNATIONS

IEC/EN ISO 3166: 2008

Codes for the representation of names of countries and their subdivisions.

IEC/EN ISO 4157: 1999

Construction drawings – Designation systems. Part 1: Buildings and parts of buildings. Part 2: Room names and numbers. Part 3: Room indentifiers.

IEC/EN ISO 81346: 2009

Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations – Part 1: Basic rules. Part 2: Classification of objects and codes for classes.
IEC 81346, published jointly by IEC and ISO, establishes general principles for the structuring of systems including structuring of the information about systems. Based on these principles, rules and guidance are given for the formulation of unambiguous reference designations for objects in any system.

IEC/EN 61355: 2008

Classification and designation of documents for plants, systems and equipment – Part 1: Rules and classification tables. This part of IEC 61355 provides rules and guidelines for the classification of documents based on their characteristic content of information. A letter-code indicating the document kind class is provided together with rules and guidelines for its application in a document designation code. This standard is relevant for documents in all technical areas which are in use during the life cycle of a plant, system or equipment.

IEC/EN 61175: 2006

Industrial systems, installations and equipment and industrial products – Designation of signals.

SYMBOLS

ISO 1219-series (2006)

Fluid power systems and components – Graphic symbols and circuit diagrams – Part 1: Graphic symbols for conventional use and data-processing applications Part 2: Circuit diagrams.

IEC/EN 1861: 2000

Refrigerating systems and heat pumps – System flow diagrams and piping and instrument diagrams – Layout and symbols. This European Standard specifies the symbols and drawing rules for system flow diagrams and piping and instrument diagrams to be applied to refrigerating systems including heat pumps.

ISO 3511 series (1982 – 1988)

Process measurement control functions and instrumentation – Symbolic representation. Part 1: Basic requirements. Part 2: Extension of basic requirements. Part 3: Detailed symbols for instruments interconnection diagrams. Part 4: Basic symbols for process computer, interface and shared display/control functions.

ISO 5784-1: 1989

Fluid power systems and components – Fluid logic circuits – Part 1: Symbols for binary logic and related functions.

IEC/EN 60617: 2005

For database standards see www.iec.ch. You can buy access to the database through your national standards association. (Most of) The symbols are included with PC|SCHEMATIC Automation.
Graphical symbols for diagrams. Part 2: Symbol elements, qualifying symbols and other symbols having general application. Part 3: Conductors and connecting devices. Part 4: Basic passive components. Part 5: Semiconductors and electron tubes. Part 6: Production and conversion of electrical energy. Part 7: Switchgear, controlgear and protective devices. Part 8: Measuring instruments, lamps and signalling devices. Part 9: Telecommunications: Switching and peripheral equipment. Part 10: Telecommunications: Transmission. Part 11: Architectural and topographical installation plans and diagrams. Part 12: Binary logic elements . Part 13: Analogue elements.

IEC/EN 80416 (2002 -2009)

Basic principles for graphical symbols for use on equipment. Part 1: Creation of graphical symbols for registration. Part 2: Form and use of arrows. Part 3: Guidelines for the application of graphical symbols. Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons).

IEC/EN ISO 81714: 2007

Design of graphical symbols for use in the technical documentation of products. Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange.

TECHNICAL DRAWING

IEC/EN ISO 128 series (2001 – 2006)

Technical drawings – General principles of presentation. Basic rules for technical drawing and presentation; line types, arrow types, projections etc.

ISO 3098 series (1998-2000)

Technical product documentation – Lettering. Part 0: General requirements. Part 2: Latin alphabet, numerals and marks. Part 3: Greek alphabet. Part 4: Diacritical and particular marks for the Latin alphabet. Part 5: CAD lettering of the Latin alphabet, numerals and marks. Part 6: Cyrillic alphabet.

IEC/EN ISO 4157: 1999

Construction drawings – Designation systems. Part 1: Buildings and parts of buildings. Part 2: Room names and numbers. Part 3: Room indentifiers.

IEC/EN ISO 5455: 1994

Technical drawings – Scales.

IEC/EN ISO 5457: 2011

Technical product documentation – Sizes and layout of drawing sheets.

IEC 60027: 2007

Letter symbols to be used in electrical technology. Part 1: General. Part 2: Telecommunications and electronics. Part 3: Logarithmic and related quantities, and their units. Part 4: Rotating electric machines.

IEC/EN ISO 6433: 1995

Technical Drawings – Item references.

IEC/ISO 7200: 2004

Technical product documentation – Data fields in title blocks and document headers This International standard specifies the data fields used in the title blocks and headers of technical product documents. Its purpose is to facilitate the exchange of documents and ensure compatibility by defining field names, their contents and their length (number of characters). It covers manual as well as computer-based design work, and is applicable to all kinds of documents for all kind of products in all phases of the product life cycle and all fields of engineering. It contains document-management-relevant data fields but not fields for specific technology areas or product requirements. It supports the cross-use and re-use of documents.

ISO 10209: 1997 (under revision)

Technical product documentation – Vocabulary – Terms relating to technical drawings, product definition and related products.

IEC/EN 61082-1: 2007

This part of IEC 61082 provides general rules and guidelines for the presentation of information in documents, and specific rules for diagrams, drawings and tables used in electrotechnology.

IEC/EN 60375:2003

The International Standard lays down rules for signs and reference directions and reference polarities for electric currents and voltages in electric networks, as well as for the corresponding quantities in magnetic circuits.

“Electrical documentation according to standards” is written and published by PCSCHEMATIC A/S.